Jaguar DI (Direct/Indirect)

The Jaguar DI Direct/Indirect is a linear luminaire which can be supplied in continuous lengths of 70mm increments. Continuous lengths of multiple runs come as standard with a ‘through wiring’ loom meaning that only the start module of the run requires termination.

The DLOR & ULOR of the Jaguar DI is can be programmed independently to give a fully customisable uplight to downlight ratio such as 90/10, 70/30 and 50/50.  

The Jaguar Direct luminaire is built in a modular system for ease of installation and maintenance. All the electronic gear and wiring is housed on a removable gear tray separate from the main body and retained by sprung metal clips.

Clock Icon

More than 70,000 hours life span

'Plug and Play' No hard fixing

Easy install No remote components

Modular component build

Options

TypeOptionsCode
JaguarDirectJAG/DI
Diffuser TypeFrosted Opal
Micro Prism
/F1
/P1
Module TypeStandalone
Start
Middle
End
Corner
Cross
/0
/1
/2
/3
/4
/5
Lumen OutputSee datasheet table 

Length

574mm to 2954mm
(See datasheet table)
/****
Colour Temperature3000K
4000K
6500K
Tunable White
/3K
/4K
/6K
/TW

Extras

TypeOptionsCode
DimmingDALI Dimming
Switch dim/Touch dim
Casambi
-DA
-TD
-CA
MountingSuspension Kit & 2m Power Flex-S
SensorPIR & Daylight
Smart Mesh, PIR & Daylight
-S1
-S2
Emergency3 Hour Facility
3 Hour Self Test
3 Hour Central Test
-E1
-E2
-E3

Jaguar Length Calculator

Diffuser Options

Micro Prism

The micro prism diffuser eliminates glare by redirecting sideways light emission downwards, giving the luminaire a dimmer appearance when viewed from the side. 

This diffuser type is therefore recommended when a very low UGR rating is required or if the luminaire is required to have a high lumen package and therefore needs optical control to remain UGR compliant.

Opal PMMA

The opal diffuser creates an homogeneous even light output whilst also remaining aesthetically even in appearance across its surface. Due to these characteristics the opal diffuser naturally creates a higher uniformity in interior spaces whilst increasing the amount of light on the walls & vertical surfaces in the spirit of LG7. 

This diffuser is therefore recommended in spaces where high uniformity, vertical illuminance and LG7 performance is required.

Tunable White

The effect of light on our biological clock is important as it influences many aspects of our physical and emotional well-being. This biological clock is regulated by light and darkness, by the daily cycles of night and day and the time we spend asleep and awake.

In the morning, as the sun comes up, light levels increase, the colour of light shifts towards cooler colour temperatures, and we wake up and become active. On the other hand, in the evening, as the sun goes down and the colour of light shifts towards warmer colour temperatures, we unwind, relax and prepare for sleep.

Our body’s hormone levels rise and fall with these light cycles. Cortisol production increases with morning light and decreases throughout the course of the day. Melatonin levels increase as darkness sets in and decrease as morning approaches. In our modern society, we spend much of our time indoors – at home, in a school, office, shop or hospital. Those who have to stay indoors for significant parts of their time under static lighting conditions run the risk of disrupting their biological rhythms.

Smart Programming

Using Premium LED drivers with window function, our luminaires can be preset (both Fixed Output & DALI versions) during the production process to a desired lumen output. This gives the versatility to reflect custom lumen packages used for project based lighting calculations.

Another benefit to this technology is post luminaire installation, the light output can be adjusted to increase/decrease from its original setting. This could be in the instance of a rentable space (CAT A) becoming an occupied space (CAT B).

Performance

Typical Lumen OutputsWattagell/cW
1638 lm/m (Opal F2)12.9 W/m127.0 ll/cW
1704 lm/m (Prismatic P1)12.9 W/m132.1 ll/cW
Light SourceSMD
SDCM3
 Longevity (L70/B10)70,000 hours
Colour Rendering80
UGR<19

Technical Data

IP RatingIP20
ConstructionAluminium Body
Polycarbonate diffuser
RAL Colour
(Other colours available upon special request)
RAL9016 (Standard)
RAL9010
RAL9005
Mounting Method2m Suspended
Protective Class1
Impact Resistance (IK)IK04
Warranty5 Years
CertificationUKCA, CE, ROHS

Electrical Data

Rated Supply Voltage220 – 240 V
AC Voltage Range198 – 264 V
Mains Frequency50/60 Hz
Output LF current ripple @ 120Hz (Flicker)<4%
Overvoltage Protection320 V
In-rush Current20.9 A
THD<10%
Power Factor0.98
Parasitic Load1.25W
Operating Temperature-25 +60°C

Emergency

Lumen OutputBLFEmergency Lumen Output
1638 lm/m22%356 lm
1704 lm/m22%370 lm
Emergency Duration3 Hours
Recharge Period16 Hours
Battery TypeLiFePO4 (Lithium Iron Phosphate)
Battery Pack6.4V 3000Ah
Parasitic Load1.2W
Operating Tempertaure0 – 60°C
Power Efficiency95%
CertificationUKCA, CE, ROHS

Downloads

Datasheet

Installation Guide

TM65

Photometrics